Horizontal 5-Axis Machining Center
・ Moving crossbeam with double column design
・ One-piece H-shaped column design
・ Y-axis adopt "symmetrical dual-drive" design
・ European mechanical milling head with high torque up to 1,200 Nm
・ European torque motor drive rotary table
・ Friendly operation interface

Machine Model Unit Rhino 1700
Rhino 2000
Milling Head Model
H5 H5
X-axis travel
mm
1,800
2,800
Y-axis travel
mm 1,300 1,615
Z-axis travel
mm 1,800 2,800
Distance between spindle nose & table (Vertical) mm -165 ~ 1,135 -165 ~ 1,450
Distance between spindle nose & table (Horizontal)
mm 150 ~ 1,450 150 ~ 1,765
Spindle pass table center mm 100 1,000
Working Table
Diameter mm Ø1,250
Ø2,000
T-slot width mm 22 22
Max. rotation speed rpm

Milling 50
Opt: Milling 50/Turning 250

20
Load kg

6,000
Opt: Milling 6,000/Turning 3,000

8,000

Workpiece Dimension

* Cutting tool length already been deducted 100mm

mm

Feedrate
X/Y/Z moving speed m/min 24/ 24/24
24/24/24
Auto Tool Changer
Spindle taper type
BT-50 BT-50
Magazine capacity
pcs 40 40
Max.tool weight
kg 20 20
Max.tool length mm 400 400
Max.tool dimension mm Ø125
Ø125

* The company reserves the right to change, with all the technical specifications of the contract-based technology.

Rhino1700_dimension


Machine Model Unit Rhino 1700 Rhino 2000
L (Length) mm 8,910 9,900
W (Width) mm 6,115 7,200
H (Height) mm 4,630 5,100



European 
Torque Motor Drive Rotary Table

  • Equipped with torque motor direct drive, no gear wear, ensure permanent high precision.
  • High-rigidity & high-precision cross-roller bearings are used to ensure its accuracy and rigidity.
  • Perform five axis machining with a universal milling head.
  • The hydraulic brake system tightly locks the rotating shaft to meet the needs of heavy cutting at any position.
  • Standard HEIDENHAIN rotate encoder achieving high precision machining.
  • Built-in circulating cooling system, able to work stably for a long time.

 


Standard

  • HEIDENHAIN TNC-640 controllers (X, Y, Z, B, C-five-axis continuous).
  • HEIDENHAIN Handwheel–HR520.
  • Milling Head
    European fork type milling head
    Spindle: BT50 / 1,200Nm - 4,000rpm
  • BT-50 40 tools magazine.
  • European torque motor rotary table.
  • 8 Heavy roller linear guideway( X / Z axis each 2, Y-axis*4 )
  • 4 HEIDENHAIN linear scale( X / Z axis each 1, Y-axis*2 )
  • Large diameter and high-speed silent precision ball screw 
  • Electrical cabinet temperature control device(Taiwan HABOR).
  • X/Y Linear motor and milling head DD-motor and spindle cooler (Taiwan HABOR).
  • Fluid flushing equipment.
  • Machine tool filter.
  • Spiral-type chip conveyor and rear-type chip conveyor containing iron filings cars each 1 style.
  • Cutting oil-mist device.
  • Full cover sheet metal.
  • Waterproof work said light.
  • Electrical cabinet with a variety of electrical protection, filtration and ventilation installations and air-conditioning systems.
  • Machine standard paint.



Option Accessories

  • European milling heads
    - European torque motor drive universal milling head 
      Spindle:  BT50 / 750Nm - 5,000rpm
    - European torque motor drive fork type milling head 
      Spindle: HSK-A100 / 330Nm - 10,000rpm
      Spindle: HSK-A100 / 400Nm - 6,000rpm
    - European torque motor drive universal milling head                                                                                
      Spindle:  HSK-A100 / 330Nm - 10,000rpm
      Spindle:  HSK-A100 / 400Nm & 6,000rpm
  • Turning & milling function (Not Available Rhino2000)
    - Torque motor drive rotary table with turning & milling  spindle
    - HEIDENHAIN TNC640 turning & milling control panel
    - BLUM laser tool measuring system (Imported from Germany)
  • Siemens 840D sl CNC panel controller
  • BLUM laser tool measuring system(Imported from Germany)
  • BLUM probe for workpiece measuring(Imported from Germany)
  • Blum form control software
  • Cooling through spindle 20/40/70 bar
  • Automatic kinematics 5-axis compensation function
  • HEIDENHAIN wireless handwheel - HR550
  • Transformer
  • Voltage stabilizer


Milling head


U45 
European 
Universal Milling Head

  • European torque motor drive universal milling head, it can reach the lowest horizontal machining space and the highest vertical machining space.
  • High torque mechanical transmission spindle continuous torque can meet 750Nm, specialize for hard-to-cut material.
  • With 0.001 indexing and torque motor drive rotary table, machine can achieve 5 axis simultaneously cutting.
  • A-axis adopts hydraulic brake with high torque to ensure the machining needs at any position.
  • A-axis adopts high torque hydraulic brake system and high rigidity cross roller bearing, ensuring high precision and high rigidity.
  • Standard configuration HEIDENHAIN angle encoder to reach high precision machining.
  • Equipped with inner cooling system, it can operate stably for a long time.

u45

u45_torquemotor

    A-Axis Torque Motor Drive


  • No backlash, no wear and achieve long lasting accuracy
  • High-speed, high-torque, high-acceleration & high-deceleration
  • No ball screw, no worn gears, belts can be tired without easy-to-wear transmission mechanism
  • Simple structure, fast and convenient maintenance, low maintenance cost
u45_dimension

Milling Head Model Unit U45
Max.rotation speed
rpm 50
Max.rotation torque
Nm 2,170
Continuous torque
Nm 1,240
Brake torque
Nm 5,400
Rotation angle
degree ±180°

u45_chart400nment

Spindle Taper type HSK-A100
Max.rotation speed
rpm 10,000
Power S1-100% (S6-40%) kW 69(86)
Torque S1-100% (S6-40%) Nm 330(415)


u45_chart300nment

Spindle Taper type HSK-A100
Max.rotation speed
rpm 6,000
Power S1-100% (S6-40%) kW 42(53)
Torque S1-100% (S6-40%) Nm 400(506)


U75A 
European 
Universal Milling Head

  • High torque mechanical transmission spindle can deliver torque up to 750Nm, which is specialized for hard-to-cut materials.
  • Torque motor direct-drive universal milling head, it can reach the lowest horizontal machining and the highest vertical machining.
  • High accuracy 0.001 degree indexing on A-axis with rotary table can achieve 5-axis machining.





    A-Axis Torque Motor Drive


  • No backlash, no wear and achieve long lasting accuracy
  • High-speed, high-torque, high-acceleration & high-deceleration
  • No ball screw, no worn gears, belts can be tired without easy-to-wear transmission mechanism
  • Simple structure, fast and convenient maintenance, low maintenance cost







u75a_dimension

Milling Head Model Unit U75A
Max.rotation speed
rpm 50
Max.rotation torque
Nm 1,600
Continuous torque
Nm 980
Brake torque
Nm 4,000
Rotation angle
degree ±180°

U75A_chart

Spindle Taper type BT-50
Max.rotation speed
rpm 5,000
Max.power kW 30
Max.torque Nm 750



H5 
European Fork Type 
Mechanical Milling Head

  • Specialized for aerospace industry, including aircraft titanium alloys, super alloy and hard-to-cut material.
  • Fork type structural design with support of bearing on both sides to provide stable cutting rigidity.
  • A-axis adopts high rigidity cross roller bearing to ensure high precision and high rigidity.
  • Simple design with low maintenance cost.
  • Equipped with inner cooling system, it can operate stably for a long time.

h5millinghead

H5_dimension

Milling Head Model Unit H5
Max.rotation speed
rpm 15
Max.rotation torque
Nm 3,000
Continuous torque
Nm 1,200
Brake torque
Nm 6,500
Rotation angle
degree +40° ~ -120°

h5chart

Spindle Taper type BT-50
Max.rotation speed
rpm 4,000
Max.power kW 37
Max.torque Nm 1,200
Brake Torque Nm 6,500



TCH-25SA 
European 
Fork Type Milling Head

  • Fork structure design, both sides are equipped with bearing supports to provide more stable cutting rigidity.
  • B-axis adopt torque motor direct-drive with the high rigidity and high precision cross roller bearing, to ensure rigidity and precision.
  • Modular design, fast and convenient maintenance, reduce maintenance costs.
  • Equipped with a cooling function, it can operate stably for a long time.
  • Standard configuration HEIDENHAIN angle encoder to reach high precision machining.

tch25bSA

tch25SA DIRECT DRIVE MOTOR
torquemotorequipmenten

    B-Axis Torque Motor Drive


  • No backlash, no wear and achieve long lasting accuracy
  • High-speed, high-torque, high-acceleration & high-deceleration
  • No ball screw, no worn gears, belts can be tired without easy-to-wear transmission mechanism
  • Simple structure, fast and convenient maintenance, low maintenance cost



tch25bintro


TCH25_dimension

Milling Head Model Unit

TCH25SA

Max.rotation speed
rpm 50
Max.acceralation rad/sec²
30
Max.rotation torque
Nm 1,450
Continuous torque
Nm 930
Brake torque
Nm 10,500
Rotation angle
degree +40°~ -120°

TCH25SA_chart

Spindle Taper type BT-50
Max.rotation speed
rpm 12,000
Power  S1-100% (S6-40%) kW 40(50)
Torque  S1-100% (S6-40%) Nm 248(314)